Our bicycle house convinces with a hot-dip galvanized steel construction and weatherproof corrugated metal roof in different sizes. Stability and attractive design are guaranteed by galvanized steel profiles and larch wood wall panels. The purlin-less roof system with all-round beveled profile and the color-coated profiled sheets in gray-white (RAL 9002), which are strip-galvanized on both sides, give the shelter an attractive appearance. A water spout system on the rear right corner post ensures efficient drainage about 120 mm above the ground. This carefully designed and tested shelter provides protection from the elements.The corrosion protection of the entire structure complies with class C4 medium according to DIN EN ISO 12944-2.The roof sheet is in gray white (RAL 9002), while the steel structure can be individually designed in a RAL color of your choice (excluding pearl and signal colors). This not only ensures effective protection against corrosion, but also allows you to match your corporate identity and design ideas.Our weatherproof canopies offer variable sizes and numerous options for rear and side panels, including printable toughened glass. This creates canopies for vehicles, material storage or comfortable lounges. With individual coloring in C4 medium quality, you can realize your CI concepts and design wishes.Thanks to the existing type statics for high wind and snow loads, you save both time and money. The wind and snow loads are Sk = 1.9 kN/m2. In the snowiest zones (3) in Germany, the characteristic Sk value is at least 1.10 kN/m2. The structures are also approved for wind load zones I - III and are thus valid throughout Germany.Dimensions:Width: 3,180 mmDepth: 2,165 mmHeight: 2,510 mmLight height: 2,360 mmTechnical specifications: Number of wall elements: 5 Construction: Welded Roof type: trapezoidal sheet Drainage: Via water spout Surface: Hot-dip galvanized and color coated - RAL color of your choice Tube diameter: 60 mm Back panel type: wood (larch) Side panel type: wood (larch) Snow load: 1.90 kN/m² Weight: 600 kg Wind load zone: Zone 1 to 3 Warranty: 5 yearsWall panels made of larch wood:The wall elements made of high quality larch wood.We offer you several options for delivery:1. Fully assembled: The roofing is completely pre-assembled and delivered by crane truck directly to the desired installation site. There it will be professionally positioned. Please note that a truck crane checklist must be completed prior to delivery. Click on the following link to view the checklist. Truck Crane Checklist (PDF)2. Kit Delivery: If the installation site is not accessible by crane truck, we will deliver the roofing to you as a kit. The kit contains all the necessary components and detailed installation instructions. You can then assemble the roofing independently on site: Please let us know which delivery option you choose when ordering. We will make sure your canopy is delivered on time and according to your requirements.There are several ways to attach or base a smoking canopy to the ground. Here are the following options:1. Fastening to an existing foundation:You can dowel the smoking enclosure onto foundation points or floor slabs provided by the customer. These foundation points should already be in place and sufficiently strong to support the weight of the canopy. By doweling you get a solid connection between the canopy and the foundation.2. Paved surface:If you have a paved surface, it is possible to use extended support pillars. These support posts are concreted into the ground and can then be integrated into the paving. This provides a secure attachment while maintaining the height of the smoking enclosure.It is important to note that the exact method of attachment or foundation will depend on several factors, such as the size and weight of the smoking enclosure, local building codes, and soil conditions at your site. It is recommended that a professional be consulted to determine the appropriate method for your specific situation and to ensure that the installation is safe and stable.Concrete floor slab:A prefabricated reinforced concrete floor slab offers a practical solution without expensive and complex foundation work. It is placed at ground level on a prepared sand or gravel bed. The neutral design also provides an attractive appearance. The base plate has dimensions of 3835x2360x140 mm and weighs about 3090 kg. With its textured top surface (slip resistance class R13) and stone joint grid (300x300 mm), it ensures safety and improved drainage. The base plate contains the necessary reinforcement up to 15 kg/m2 and is supplied including 4 pieces of transport anchors. It provides a solid and stable base for your smoking roof. Note that professional assistance is recommended to ensure proper installation. Roof planting:With our modular and sustainable green roof system, we create a valuable contribution for people and nature. Our system is based on easy-to-integrate modules that fit perfectly into the trapezoidal profile of our roofs. These modules consist of special tubs planted with hardy sedum plants. This innovative solution provides you with a green and vibrant roofscape, which is not only aesthetically pleasing, but also offers numerous ecological benefits.Frame color of your choice:To select the desired RAL color for the frame of the profiles, please specify the appropriate RAL color designation in the input field. Our frame color can be customized according to your preferences and needs. RAL colors (PDF)We offer suitable accessories for your smoking canopy:1. Lighting - InLight: Our fully integrated lighting system has a motion sensor and efficient LED technology. It provides comfortable lighting in the canopy and increases safety.2. Lighting with Photovoltaic - InLight with Solar Panel: This option includes the InLight lighting system with a solar panel. It comes with a post and base plate that can be doweled on. This makes the lighting system independent of the power grid. The integrated battery has a capacity of 432 Wh.3. Version "ALPIN" for high snow loads: On request, we offer a version "ALPIN", which is specially designed for high snow loads. Due to reinforced profiles, our canopies can withstand snow loads up to Sk = 6 kN/m². Please contact us for more information.We will be happy to provide you with further information on our range of accessories and to consider your specific requirements.Structure and assembly:If you decide to have our team install the system, we would like to give you the following instructions:You must provide the required foundations according to our specifications. After receiving the order confirmation, we will provide you with a foundation plan. When dimensioning the foundations, we assume normal soil conditions (2 kg/sqcm).It is important to ensure that the holes for fastening into the floor slab can be drilled without reinforcement and with a minimum depth of 100 mm.Please ensure that there are no utility lines in the area where the ground dowelling will take place.Our quotation assumes that there are no significant longitudinal or transverse slopes that would require an adjustment of the construction. However, if necessary, we will be happy to provide a slope adjustment at an additional cost.The footings to be constructed must be on the same level, level and have no slopes. The maximum height difference should be +/- 5 mm.Please note that dowelling by our installation team on paved or asphalt surfaces (tar, bitumen, etc.) is not permitted.If you choose our installation services, we will ensure that these requirements are properly met.Please note that you, as the customer, are responsible for disposing of the packaging material required for truck transportation. The packing material, such as wood, PE film, cardboard, etc., should be disposed of properly by you. We recommend that you make appropriate arrangements to properly dispose of the packaging material to minimize environmental impact.Delivery time: For our roofing, the delivery time is usually about 6-8 weeks after receipt of order confirmation.Please note that items that are coated according to RAL colors, custom-made or custom-made products are excluded from exchange (return).

Our bicycle house convinces with a hot-dip galvanized steel construction and weatherproof corrugated metal roof in different sizes. Stability and attractive design are guaranteed by galvanized steel profiles and galvanized perforated metal sheed wall panels. The purlin-less roof system with all-round beveled profile and the color-coated profiled sheets in gray-white (RAL 9002), which are strip-galvanized on both sides, give the shelter an attractive appearance. A water spout system on the rear right corner post ensures efficient drainage about 120 mm above the ground. This carefully designed and tested shelter provides protection from the elements.The corrosion protection of the entire structure complies with class C4 medium according to DIN EN ISO 12944-2.The roof sheet is in gray white (RAL 9002), while the steel structure can be individually designed in a RAL color of your choice (excluding pearl and signal colors). This not only ensures effective protection against corrosion, but also allows you to match your corporate identity and design ideas.Our weatherproof canopies offer variable sizes and numerous options for rear and side panels, including printable toughened glass. This creates canopies for vehicles, material storage or comfortable lounges. With individual coloring in C4 medium quality, you can realize your CI concepts and design wishes.Thanks to the existing type statics for high wind and snow loads, you save both time and money. The wind and snow loads are Sk = 1.9 kN/m2. In the snowiest zones (3) in Germany, the characteristic Sk value is at least 1.10 kN/m2. The structures are also approved for wind load zones I - III and are thus valid throughout Germany.Dimensions:Width: 3,180 mmDepth: 2,165 mmHeight: 2,510 mmLight height: 2,360 mmTechnical specifications: Number of wall elements: 9 Construction: Welded Roof type: trapezoidal sheet Drainage: Via water spout Surface: Hot-dip galvanized and color coated - RAL color of your choice Tube diameter: 60 mm Back panel type: perforated metal sheet galvanized (optional powder coated in RAL 7016) Side panel type: erforated metal sheet galvanized (optional powder coated in RAL 7016) Snow load: 1.90 kN/m² Weight: 600 kg Wind load zone: Zone 1 to 3 Warranty: 5 yearsWall panels made of larch perforated sheet metal:The wall elements made of high quality galvanized perforated sheet metal. Additional painting in RAL 7016 is avaliable.We offer you several options for delivery:1. Fully assembled: The roofing is completely pre-assembled and delivered by crane truck directly to the desired installation site. There it will be professionally positioned. Please note that a truck crane checklist must be completed prior to delivery. Click on the following link to view the checklist. Truck Crane Checklist (PDF)2. Kit Delivery: If the installation site is not accessible by crane truck, we will deliver the roofing to you as a kit. The kit contains all the necessary components and detailed installation instructions. You can then assemble the roofing independently on site: Please let us know which delivery option you choose when ordering. We will make sure your canopy is delivered on time and according to your requirements.There are several ways to attach or base a smoking canopy to the ground. Here are the following options:1. Fastening to an existing foundation:You can dowel the smoking enclosure onto foundation points or floor slabs provided by the customer. These foundation points should already be in place and sufficiently strong to support the weight of the canopy. By doweling you get a solid connection between the canopy and the foundation.2. Paved surface:If you have a paved surface, it is possible to use extended support pillars. These support posts are concreted into the ground and can then be integrated into the paving. This provides a secure attachment while maintaining the height of the smoking enclosure.It is important to note that the exact method of attachment or foundation will depend on several factors, such as the size and weight of the smoking enclosure, local building codes, and soil conditions at your site. It is recommended that a professional be consulted to determine the appropriate method for your specific situation and to ensure that the installation is safe and stable.Concrete floor slab:A prefabricated reinforced concrete floor slab offers a practical solution without expensive and complex foundation work. It is placed at ground level on a prepared sand or gravel bed. The neutral design also provides an attractive appearance. The base plate has dimensions of 3835x2360x140 mm and weighs about 3090 kg. With its textured top surface (slip resistance class R13) and stone joint grid (300x300 mm), it ensures safety and improved drainage. The base plate contains the necessary reinforcement up to 15 kg/m2 and is supplied including 4 pieces of transport anchors. It provides a solid and stable base for your smoking roof. Note that professional assistance is recommended to ensure proper installation. Roof planting:With our modular and sustainable green roof system, we create a valuable contribution for people and nature. Our system is based on easy-to-integrate modules that fit perfectly into the trapezoidal profile of our roofs. These modules consist of special tubs planted with hardy sedum plants. This innovative solution provides you with a green and vibrant roofscape, which is not only aesthetically pleasing, but also offers numerous ecological benefits.Frame color of your choice:To select the desired RAL color for the frame of the profiles, please specify the appropriate RAL color designation in the input field. Our frame color can be customized according to your preferences and needs. RAL colors (PDF)We offer suitable accessories for your smoking canopy:1. Lighting - InLight: Our fully integrated lighting system has a motion sensor and efficient LED technology. It provides comfortable lighting in the canopy and increases safety.2. Lighting with Photovoltaic - InLight with Solar Panel: This option includes the InLight lighting system with a solar panel. It comes with a post and base plate that can be doweled on. This makes the lighting system independent of the power grid. The integrated battery has a capacity of 432 Wh.3. Version "ALPIN" for high snow loads: On request, we offer a version "ALPIN", which is specially designed for high snow loads. Due to reinforced profiles, our canopies can withstand snow loads up to Sk = 6 kN/m². Please contact us for more information.We will be happy to provide you with further information on our range of accessories and to consider your specific requirements.Structure and assembly:If you decide to have our team install the system, we would like to give you the following instructions:You must provide the required foundations according to our specifications. After receiving the order confirmation, we will provide you with a foundation plan. When dimensioning the foundations, we assume normal soil conditions (2 kg/sqcm).It is important to ensure that the holes for fastening into the floor slab can be drilled without reinforcement and with a minimum depth of 100 mm.Please ensure that there are no utility lines in the area where the ground dowelling will take place.Our quotation assumes that there are no significant longitudinal or transverse slopes that would require an adjustment of the construction. However, if necessary, we will be happy to provide a slope adjustment at an additional cost.The footings to be constructed must be on the same level, level and have no slopes. The maximum height difference should be +/- 5 mm.Please note that dowelling by our installation team on paved or asphalt surfaces (tar, bitumen, etc.) is not permitted.If you choose our installation services, we will ensure that these requirements are properly met.Please note that you, as the customer, are responsible for disposing of the packaging material required for truck transportation. The packing material, such as wood, PE film, cardboard, etc., should be disposed of properly by you. We recommend that you make appropriate arrangements to properly dispose of the packaging material to minimize environmental impact.Delivery time: For our roofing, the delivery time is usually about 6-8 weeks after receipt of order confirmation.Please note that items that are coated according to RAL colors, custom-made or custom-made products are excluded from exchange (return).

Our bicycle house convinces with a hot-dip galvanized steel construction and weatherproof corrugated metal roof in different sizes. Stability and attractive design are guaranteed by galvanized steel profiles and larch wood wall panels. The purlin-less roof system with all-round beveled profile and the color-coated profiled sheets in gray-white (RAL 9002), which are strip-galvanized on both sides, give the shelter an attractive appearance. A water spout system on the rear right corner post ensures efficient drainage about 120 mm above the ground. This carefully designed and tested shelter provides protection from the elements.The corrosion protection of the entire structure complies with class C4 medium according to DIN EN ISO 12944-2.The roof sheet is in gray white (RAL 9002), while the steel structure can be individually designed in a RAL color of your choice (excluding pearl and signal colors). This not only ensures effective protection against corrosion, but also allows you to match your corporate identity and design ideas.Our weatherproof canopies offer variable sizes and numerous options for rear and side panels, including printable toughened glass. This creates canopies for vehicles, material storage or comfortable lounges. With individual coloring in C4 medium quality, you can realize your CI concepts and design wishes.Thanks to the existing type statics for high wind and snow loads, you save both time and money. The wind and snow loads are Sk = 1.9 kN/m2. In the snowiest zones (3) in Germany, the characteristic Sk value is at least 1.10 kN/m2. The structures are also approved for wind load zones I - III and are thus valid throughout Germany.Dimensions:Width: 4,195 mmDepth: 2,165 mmHeight: 2,510 mmLight height: 2,360 mmTechnical specifications: Number of wall elements: 5 Construction: Welded Roof type: trapezoidal sheet Drainage: Via water spout Surface: Hot-dip galvanized and color coated - RAL color of your choice Tube diameter: 60 mm Back panel type: wood (larch) Side panel type: wood (larch) Snow load: 1.90 kN/m² Weight: 800 kg Wind load zone: Zone 1 to 3 Warranty: 5 yearsWall panels made of larch wood:The wall elements made of high quality larch wood.We offer you several options for delivery:1. Fully assembled: The roofing is completely pre-assembled and delivered by crane truck directly to the desired installation site. There it will be professionally positioned. Please note that a truck crane checklist must be completed prior to delivery. Click on the following link to view the checklist. Truck Crane Checklist (PDF)2. Kit Delivery: If the installation site is not accessible by crane truck, we will deliver the roofing to you as a kit. The kit contains all the necessary components and detailed installation instructions. You can then assemble the roofing independently on site: Please let us know which delivery option you choose when ordering. We will make sure your canopy is delivered on time and according to your requirements.There are several ways to attach or base a smoking canopy to the ground. Here are the following options:1. Fastening to an existing foundation:You can dowel the smoking enclosure onto foundation points or floor slabs provided by the customer. These foundation points should already be in place and sufficiently strong to support the weight of the canopy. By doweling you get a solid connection between the canopy and the foundation.2. Paved surface:If you have a paved surface, it is possible to use extended support pillars. These support posts are concreted into the ground and can then be integrated into the paving. This provides a secure attachment while maintaining the height of the smoking enclosure.It is important to note that the exact method of attachment or foundation will depend on several factors, such as the size and weight of the smoking enclosure, local building codes, and soil conditions at your site. It is recommended that a professional be consulted to determine the appropriate method for your specific situation and to ensure that the installation is safe and stable.Concrete floor slab:A prefabricated reinforced concrete floor slab offers a practical solution without expensive and complex foundation work. It is placed at ground level on a prepared sand or gravel bed. The neutral design also provides an attractive appearance. The base plate has dimensions of 4720x2360x140 mm and weighs about 3800 kg. With its textured top surface (slip resistance class R13) and stone joint grid (300x300 mm), it ensures safety and improved drainage. The base plate contains the necessary reinforcement up to 15 kg/m2 and is supplied including 4 pieces of transport anchors. It provides a solid and stable base for your smoking roof. Note that professional assistance is recommended to ensure proper installation. Roof planting:With our modular and sustainable green roof system, we create a valuable contribution for people and nature. Our system is based on easy-to-integrate modules that fit perfectly into the trapezoidal profile of our roofs. These modules consist of special tubs planted with hardy sedum plants. This innovative solution provides you with a green and vibrant roofscape, which is not only aesthetically pleasing, but also offers numerous ecological benefits.Frame color of your choice:To select the desired RAL color for the frame of the profiles, please specify the appropriate RAL color designation in the input field. Our frame color can be customized according to your preferences and needs. RAL colors (PDF)We offer suitable accessories for your smoking canopy:1. Lighting - InLight: Our fully integrated lighting system has a motion sensor and efficient LED technology. It provides comfortable lighting in the canopy and increases safety.2. Lighting with Photovoltaic - InLight with Solar Panel: This option includes the InLight lighting system with a solar panel. It comes with a post and base plate that can be doweled on. This makes the lighting system independent of the power grid. The integrated battery has a capacity of 432 Wh.3. Version "ALPIN" for high snow loads: On request, we offer a version "ALPIN", which is specially designed for high snow loads. Due to reinforced profiles, our canopies can withstand snow loads up to Sk = 6 kN/m². Please contact us for more information.We will be happy to provide you with further information on our range of accessories and to consider your specific requirements.Structure and assembly:If you decide to have our team install the system, we would like to give you the following instructions:You must provide the required foundations according to our specifications. After receiving the order confirmation, we will provide you with a foundation plan. When dimensioning the foundations, we assume normal soil conditions (2 kg/sqcm).It is important to ensure that the holes for fastening into the floor slab can be drilled without reinforcement and with a minimum depth of 100 mm.Please ensure that there are no utility lines in the area where the ground dowelling will take place.Our quotation assumes that there are no significant longitudinal or transverse slopes that would require an adjustment of the construction. However, if necessary, we will be happy to provide a slope adjustment at an additional cost.The footings to be constructed must be on the same level, level and have no slopes. The maximum height difference should be +/- 5 mm.Please note that dowelling by our installation team on paved or asphalt surfaces (tar, bitumen, etc.) is not permitted.If you choose our installation services, we will ensure that these requirements are properly met.Please note that you, as the customer, are responsible for disposing of the packaging material required for truck transportation. The packing material, such as wood, PE film, cardboard, etc., should be disposed of properly by you. We recommend that you make appropriate arrangements to properly dispose of the packaging material to minimize environmental impact.Delivery time: For our roofing, the delivery time is usually about 6-8 weeks after receipt of order confirmation.Please note that items that are coated according to RAL colors, custom-made or custom-made products are excluded from exchange (return).

Our bicycle house convinces with a hot-dip galvanized steel construction and weatherproof corrugated metal roof in different sizes. Stability and attractive design are guaranteed by galvanized steel profiles and galvanized perforated metal sheed wall panels. The purlin-less roof system with all-round beveled profile and the color-coated profiled sheets in gray-white (RAL 9002), which are strip-galvanized on both sides, give the shelter an attractive appearance. A water spout system on the rear right corner post ensures efficient drainage about 120 mm above the ground. This carefully designed and tested shelter provides protection from the elements.The corrosion protection of the entire structure complies with class C4 medium according to DIN EN ISO 12944-2.The roof sheet is in gray white (RAL 9002), while the steel structure can be individually designed in a RAL color of your choice (excluding pearl and signal colors). This not only ensures effective protection against corrosion, but also allows you to match your corporate identity and design ideas.Our weatherproof canopies offer variable sizes and numerous options for rear and side panels, including printable toughened glass. This creates canopies for vehicles, material storage or comfortable lounges. With individual coloring in C4 medium quality, you can realize your CI concepts and design wishes.Thanks to the existing type statics for high wind and snow loads, you save both time and money. The wind and snow loads are Sk = 1.9 kN/m2. In the snowiest zones (3) in Germany, the characteristic Sk value is at least 1.10 kN/m2. The structures are also approved for wind load zones I - III and are thus valid throughout Germany.Dimensions:Width: 4,195 mmDepth: 2,165 mmHeight: 2,510 mmLight height: 2,360 mmTechnical specifications: Number of wall elements: 10 Construction: Welded Roof type: trapezoidal sheet Drainage: Via water spout Surface: Hot-dip galvanized and color coated - RAL color of your choice Tube diameter: 60 mm Back panel type: perforated metal sheet galvanized (optional powder coated in RAL 7016) Side panel type: erforated metal sheet galvanized (optional powder coated in RAL 7016) Snow load: 1.90 kN/m² Weight: 600 kg Wind load zone: Zone 1 to 3 Warranty: 5 yearsWall panels made of larch perforated sheet metal:The wall elements made of high quality galvanized perforated sheet metal. Additional painting in RAL 7016 is avaliable.We offer you several options for delivery:1. Fully assembled: The roofing is completely pre-assembled and delivered by crane truck directly to the desired installation site. There it will be professionally positioned. Please note that a truck crane checklist must be completed prior to delivery. Click on the following link to view the checklist. Truck Crane Checklist (PDF)2. Kit Delivery: If the installation site is not accessible by crane truck, we will deliver the roofing to you as a kit. The kit contains all the necessary components and detailed installation instructions. You can then assemble the roofing independently on site: Please let us know which delivery option you choose when ordering. We will make sure your canopy is delivered on time and according to your requirements.There are several ways to attach or base a smoking canopy to the ground. Here are the following options:1. Fastening to an existing foundation:You can dowel the smoking enclosure onto foundation points or floor slabs provided by the customer. These foundation points should already be in place and sufficiently strong to support the weight of the canopy. By doweling you get a solid connection between the canopy and the foundation.2. Paved surface:If you have a paved surface, it is possible to use extended support pillars. These support posts are concreted into the ground and can then be integrated into the paving. This provides a secure attachment while maintaining the height of the smoking enclosure.It is important to note that the exact method of attachment or foundation will depend on several factors, such as the size and weight of the smoking enclosure, local building codes, and soil conditions at your site. It is recommended that a professional be consulted to determine the appropriate method for your specific situation and to ensure that the installation is safe and stable.Concrete floor slab:A prefabricated reinforced concrete floor slab offers a practical solution without expensive and complex foundation work. It is placed at ground level on a prepared sand or gravel bed. The neutral design also provides an attractive appearance. The base plate has dimensions of 4720x2360x140 mm and weighs about 3800 kg. With its textured top surface (slip resistance class R13) and stone joint grid (300x300 mm), it ensures safety and improved drainage. The base plate contains the necessary reinforcement up to 15 kg/m2 and is supplied including 4 pieces of transport anchors. It provides a solid and stable base for your smoking roof. Note that professional assistance is recommended to ensure proper installation. Roof planting:With our modular and sustainable green roof system, we create a valuable contribution for people and nature. Our system is based on easy-to-integrate modules that fit perfectly into the trapezoidal profile of our roofs. These modules consist of special tubs planted with hardy sedum plants. This innovative solution provides you with a green and vibrant roofscape, which is not only aesthetically pleasing, but also offers numerous ecological benefits.Frame color of your choice:To select the desired RAL color for the frame of the profiles, please specify the appropriate RAL color designation in the input field. Our frame color can be customized according to your preferences and needs. RAL colors (PDF)We offer suitable accessories for your smoking canopy:1. Lighting - InLight: Our fully integrated lighting system has a motion sensor and efficient LED technology. It provides comfortable lighting in the canopy and increases safety.2. Lighting with Photovoltaic - InLight with Solar Panel: This option includes the InLight lighting system with a solar panel. It comes with a post and base plate that can be doweled on. This makes the lighting system independent of the power grid. The integrated battery has a capacity of 432 Wh.3. Version "ALPIN" for high snow loads: On request, we offer a version "ALPIN", which is specially designed for high snow loads. Due to reinforced profiles, our canopies can withstand snow loads up to Sk = 6 kN/m². Please contact us for more information.We will be happy to provide you with further information on our range of accessories and to consider your specific requirements.Structure and assembly:If you decide to have our team install the system, we would like to give you the following instructions:You must provide the required foundations according to our specifications. After receiving the order confirmation, we will provide you with a foundation plan. When dimensioning the foundations, we assume normal soil conditions (2 kg/sqcm).It is important to ensure that the holes for fastening into the floor slab can be drilled without reinforcement and with a minimum depth of 100 mm.Please ensure that there are no utility lines in the area where the ground dowelling will take place.Our quotation assumes that there are no significant longitudinal or transverse slopes that would require an adjustment of the construction. However, if necessary, we will be happy to provide a slope adjustment at an additional cost.The footings to be constructed must be on the same level, level and have no slopes. The maximum height difference should be +/- 5 mm.Please note that dowelling by our installation team on paved or asphalt surfaces (tar, bitumen, etc.) is not permitted.If you choose our installation services, we will ensure that these requirements are properly met.Please note that you, as the customer, are responsible for disposing of the packaging material required for truck transportation. The packing material, such as wood, PE film, cardboard, etc., should be disposed of properly by you. We recommend that you make appropriate arrangements to properly dispose of the packaging material to minimize environmental impact.Delivery time: For our roofing, the delivery time is usually about 6-8 weeks after receipt of order confirmation.Please note that items that are coated according to RAL colors, custom-made or custom-made products are excluded from exchange (return).

Discover our modern round arch bicycle canopy, which comes with two sturdy side frames made of galvanized square tubes and four sturdy base plates that can be doweled to the ground. The canopy system has a transparent roof covering made of 4 mm thick polycarbonate, which also serves as a rear wall covering and provides a bright atmosphere under the roof. For even better wind protection, we offer optional side walls. Drainage of rain or snow is through the back wall, allowing water to drip freely.The kit comes complete with ground mounting hardware, including stainless steel ground anchors. The entire frame construction is hot-dip galvanized and optionally powder coated in a color of your choice.Thanks to the detailed assembly instructions, the kit is easy to assemble and provides you with a practical and stylish bike shelter."Bamberg" is a favorable and modern bike shelter  - the perfect solution with the best price-performance ratio!Dimensions:Width: 2,090 mmDepth: 2,100 mmHeight: 2,290 mm (clear height 2.200 mm)Advantages:Simple and sturdy constructionRust-free due to hot-dip galvanizing, optionally with color powder coatingAvailable in various sizes up to 20mFavorable and inexpensiveShort delivery timesSimple kit for assembly on siteHigh load capacity: Snow load Sk: 0.93 kN/m², wind load zone 25 year product warrantyWe offer the following as optional accessories:2x side wall made of smooth, translucent polycarbonate, for the right and left side.Powder coating in a color of your choice. Please specify your color choice in the appropriate selection field.Delivery and unloading:The bike canopy "Bamberg" is delivered as a kit packed on a pallet by freight forwarding. For unloading, you have two options:Unloading from the curb free: the kit is unloaded and transported with a lift truck. The further movement to the installation site is done by you.Unloading by forklift from the shipping company with positioning on site: The shipping company uses a forklift to unload the kit and position it directly at the desired location.We deliver to all EU countries and Switzerland (on request) and ensure that your bike shelter arrives safely and promptly at your door.Are you looking for the right bike stand for your roofing? Just look in the menu at Bike Stands, Hoop Parkers

Discover our modern round arch bicycle canopy, which comes with two sturdy side frames made of galvanized square tubes and four sturdy base plates that can be doweled to the ground. The canopy system has a transparent roof covering made of 4 mm thick polycarbonate, which also serves as a rear wall covering and provides a bright atmosphere under the roof. For even better wind protection, we offer optional side walls. Drainage of rain or snow is through the back wall, allowing water to drip freely.The kit comes complete with ground mounting hardware, including stainless steel ground anchors. The entire frame construction is hot-dip galvanized and optionally powder coated in a color of your choice.Thanks to the detailed assembly instructions, the kit is easy to assemble and provides you with a practical and stylish bike shelter."Bamberg" is a favorable and modern bike shelter  - the perfect solution with the best price-performance ratio!Dimensions:Width: 4,130 mmDepth: 2,100 mmHeight: 2,290 mm (clear height 2.200 mm)Advantages:Simple and sturdy constructionRust-free due to hot-dip galvanizing, optionally with color powder coatingAvailable in various sizes up to 20mFavorable and inexpensiveShort delivery timesSimple kit for assembly on siteHigh load capacity: Snow load Sk: 0.8 kN/m², wind load zone 25 year product warrantyWe offer the following as optional accessories:2x side wall made of smooth, translucent polycarbonate, for the right and left side.Powder coating in a color of your choice. Please specify your color choice in the appropriate selection field.Delivery and unloading:The bike canopy "Bamberg" is delivered as a kit packed on a pallet by freight forwarding. For unloading, you have two options:Unloading from the curb free: the kit is unloaded and transported with a lift truck. The further movement to the installation site is done by you.Unloading by forklift from the shipping company with positioning on site: The shipping company uses a forklift to unload the kit and position it directly at the desired location.We deliver to all EU countries and Switzerland (on request) and ensure that your bike shelter arrives safely and promptly at your door.Are you looking for the right bike stand for your roofing? Just look in the menu at Bike Stands, Hoop Parkers

Discover our modern round arch bicycle canopy, which comes with two sturdy side frames made of galvanized square tubes and four sturdy base plates that can be doweled to the ground. The canopy system has a transparent roof covering made of 4 mm thick polycarbonate, which also serves as a rear wall covering and provides a bright atmosphere under the roof. For even better wind protection, we offer optional side walls. Drainage of rain or snow is through the back wall, allowing water to drip freely.The kit comes complete with ground mounting hardware, including stainless steel ground anchors. The entire frame construction is hot-dip galvanized and optionally powder coated in a color of your choice.Thanks to the detailed assembly instructions, the kit is easy to assemble and provides you with a practical and stylish bike shelter."Bamberg" is a favorable and modern bike shelter  - the perfect solution with the best price-performance ratio!Dimensions:Width: 8,250 mmDepth: 2,100 mmHeight: 2,290 mm (clear height 2.200 mm)Advantages:Simple and sturdy constructionRust-free due to hot-dip galvanizing, optionally with color powder coatingAvailable in various sizes up to 20mFavorable and inexpensiveShort delivery timesSimple kit for assembly on siteHigh load capacity: Snow load Sk: 0.8 kN/m², wind load zone 25 year product warrantyWe offer the following as optional accessories:2x side wall made of smooth, translucent polycarbonate, for the right and left side.Powder coating in a color of your choice. Please specify your color choice in the appropriate selection field.Delivery and unloading:The bike canopy "Bamberg" is delivered as a kit packed on a pallet by freight forwarding. For unloading, you have two options:Unloading from the curb free: the kit is unloaded and transported with a lift truck. The further movement to the installation site is done by you.Unloading by forklift from the shipping company with positioning on site: The shipping company uses a forklift to unload the kit and position it directly at the desired location.We deliver to all EU countries and Switzerland (on request) and ensure that your bike shelter arrives safely and promptly at your door.Are you looking for the right bike stand for your roofing? Just look in the menu at Bike Stands, Hoop Parkers

Discover our modern round arch bicycle canopy, which comes with two sturdy side frames made of galvanized square tubes and four sturdy base plates that can be doweled to the ground. The canopy system has a transparent roof covering made of 4 mm thick polycarbonate, which also serves as a rear wall covering and provides a bright atmosphere under the roof. For even better wind protection, we offer optional side walls. Drainage of rain or snow is through the back wall, allowing water to drip freely.The kit comes complete with ground mounting hardware, including stainless steel ground anchors. The entire frame construction is hot-dip galvanized and optionally powder coated in a color of your choice.Thanks to the detailed assembly instructions, the kit is easy to assemble and provides you with a practical and stylish bike shelter."Bamberg" is a favorable and modern bike shelter  - the perfect solution with the best price-performance ratio!Dimensions:Width: 12,350 mmDepth: 2,100 mmHeight: 2,290 mm (clear height 2.200 mm)Advantages:Simple and sturdy constructionRust-free due to hot-dip galvanizing, optionally with color powder coatingAvailable in various sizes up to 20mFavorable and inexpensiveShort delivery timesSimple kit for assembly on siteHigh load capacity: Snow load Sk: 0.8 kN/m², wind load zone 25 year product warrantyWe offer the following as optional accessories:2x side wall made of smooth, translucent polycarbonate, for the right and left side.Powder coating in a color of your choice. Please specify your color choice in the appropriate selection field.Delivery and unloading:The bike canopy "Bamberg" is delivered as a kit packed on a pallet by freight forwarding. For unloading, you have two options:Unloading from the curb free: the kit is unloaded and transported with a lift truck. The further movement to the installation site is done by you.Unloading by forklift from the shipping company with positioning on site: The shipping company uses a forklift to unload the kit and position it directly at the desired location.We deliver to all EU countries and Switzerland (on request) and ensure that your bike shelter arrives safely and promptly at your door.Are you looking for the right bike stand for your roofing? Just look in the menu at Bike Stands, Hoop Parkers

Discover our modern round arch bicycle canopy, which comes with two sturdy side frames made of galvanized square tubes and four sturdy base plates that can be doweled to the ground. The canopy system has a transparent roof covering made of 4 mm thick polycarbonate, which also serves as a rear wall covering and provides a bright atmosphere under the roof. For even better wind protection, we offer optional side walls. Drainage of rain or snow is through the back wall, allowing water to drip freely.The kit comes complete with ground mounting hardware, including stainless steel ground anchors. The entire frame construction is hot-dip galvanized and optionally powder coated in a color of your choice.Thanks to the detailed assembly instructions, the kit is easy to assemble and provides you with a practical and stylish bike shelter."Bamberg" is a favorable and modern bike shelter  - the perfect solution with the best price-performance ratio!Dimensions:Width: 16,450 mmDepth: 2,100 mmHeight: 2,290 mm (clear height 2.200 mm)Advantages:Simple and sturdy constructionRust-free due to hot-dip galvanizing, optionally with color powder coatingAvailable in various sizes up to 20mFavorable and inexpensiveShort delivery timesSimple kit for assembly on siteHigh load capacity: Snow load Sk: 0.8 kN/m², wind load zone 25 year product warrantyWe offer the following as optional accessories:2x side wall made of smooth, translucent polycarbonate, for the right and left side.Powder coating in a color of your choice. Please specify your color choice in the appropriate selection field.Delivery and unloading:The bike canopy "Bamberg" is delivered as a kit packed on a pallet by freight forwarding. For unloading, you have two options:Unloading from the curb free: the kit is unloaded and transported with a lift truck. The further movement to the installation site is done by you.Unloading by forklift from the shipping company with positioning on site: The shipping company uses a forklift to unload the kit and position it directly at the desired location.We deliver to all EU countries and Switzerland (on request) and ensure that your bike shelter arrives safely and promptly at your door.Are you looking for the right bike stand for your roofing? Just look in the menu at Bike Stands, Hoop Parkers

Discover our modern round arch bicycle canopy, which comes with two sturdy side frames made of galvanized square tubes and four sturdy base plates that can be doweled to the ground. The canopy system has a transparent roof covering made of 4 mm thick polycarbonate, which also serves as a rear wall covering and provides a bright atmosphere under the roof. For even better wind protection, we offer optional side walls. Drainage of rain or snow is through the back wall, allowing water to drip freely.The kit comes complete with ground mounting hardware, including stainless steel ground anchors. The entire frame construction is hot-dip galvanized and optionally powder coated in a color of your choice.Thanks to the detailed assembly instructions, the kit is easy to assemble and provides you with a practical and stylish bike shelter."Bamberg" is a favorable and modern bike shelter  - the perfect solution with the best price-performance ratio!Dimensions:Width: 20,550 mmDepth: 2,100 mmHeight: 2,290 mm (clear height 2.200 mm)Advantages:Simple and sturdy constructionRust-free due to hot-dip galvanizing, optionally with color powder coatingAvailable in various sizes up to 20mFavorable and inexpensiveShort delivery timesSimple kit for assembly on siteHigh load capacity: Snow load Sk: 0.8 kN/m², wind load zone 25 year product warrantyWe offer the following as optional accessories:2x side wall made of smooth, translucent polycarbonate, for the right and left side.Powder coating in a color of your choice. Please specify your color choice in the appropriate selection field.Delivery and unloading:The bike canopy "Bamberg" is delivered as a kit packed on a pallet by freight forwarding. For unloading, you have two options:Unloading from the curb free: the kit is unloaded and transported with a lift truck. The further movement to the installation site is done by you.Unloading by forklift from the shipping company with positioning on site: The shipping company uses a forklift to unload the kit and position it directly at the desired location.We deliver to all EU countries and Switzerland (on request) and ensure that your bike shelter arrives safely and promptly at your door.Are you looking for the right bike stand for your roofing? Just look in the menu at Bike Stands, Hoop Parkers